No. :P110
- Dimension Range from DN50 to DN1800
- Ductile Iron GGG50 material with FBE coated
- Flange Drilling: EN1092 PN10,PN16,AS/BS TD,TE
- PN10,PN16,PN25 working pressure
- Equipped with galvanized steel bolts, nuts
- Max. Temperature 80℃for EPDM or NBR rubber seals
- High temperature is available on request
- Un-Retrained Dismantling Joint without Tie-bar
Material Specification:
Item No. | Item Name | Material | Specification |
1 | long flange body | Ductile Iron | GGG50 |
2 | Short flange body | Ductile Iron | GGG50 |
3 | Middle flange | Ductile Iron | GGG50 |
4 | Seal Ring | Rubber | EPDM |
5 | Stud | Galvanized Steel | IS0898-1:1999 |
6 | Washer | Galvanized Steel | |
7 | Nut | Galvanized Steel | IS0898-2:1992 |
Dimensions(mm)
Size | ID | OD | Length(mm) | Adjustment(mm) | EN1092PN10 | No. of Tie-bar | |||||||
L | L1 | L±25 | D | D1 | D2 | b | n-M | 25% restrained | 50% restrained | 100% restrained | |||
DN50 | 65 | 66 | 205 | 310 | ±25 | 165 | 125 | 99 | 19 | 4-M16 | 4 | ||
DN65 | 80 | 82 | 205 | 310 | ±25 | 185 | 145 | 118 | 19 | 4-M16 | 4 | ||
DN80 | 83 | 98 | 205 | 340 | ±25 | 200 | 160 | 132 | 19 | 8-M16 | 4 | 8 | |
DN100 | 101 | 118 | 205 | 340 | ±25 | 220 | 180 | 156 | 19 | 8-M16 | 4 | 8 | |
DN150 | 154 | 170 | 205 | 340 | ±25 | 285 | 240 | 211 | 19 | 8-M20 | 4 | 8 | |
DN200 | 206.5 | 222 | 215 | 350 | ±25 | 340 | 295 | 266 | 20 | 8-M20 | 4 | 8 | |
DN250 | 258 | 274 | 220 | 370 | ±25 | 400 | 350 | 319 | 22 | 12-M20 | 3 | 6 | 12 |
DN300 | 307 | 326 | 240 | 390 | ±25 | 455 | 400 | 370 | 24.5 | 12-M20 | 3 | 6 | 12 |
DN350 | 359 | 378 | 240 | 400 | ±25 | 505 | 460 | 429 | 24.5 | 16-M20 | 4 | 8 | 16 |
DN400 | 408 | 429 | 250 | 420 | ±25 | 565 | 515 | 480 | 24.5 | 16-M24 | 4 | 8 | 16 |
DN450 | 456 | 480 | 265 | 440 | ±25 | 615 | 565 | 530 | 25.5 | 20-M24 | 5 | 10 | 20 |
DN500 | 508 | 532 | 275 | 440 | ±25 | 670 | 620 | 582 | 26.5 | 20-M24 | 5 | 10 | 20 |
DN600 | 613.4 | 635 | 295 | 460 | ±25 | 780 | 725 | 682 | 30 | 20-M27 | 5 | 10 | 20 |
DN700 | 711 | 738 | 300 | 480 | ±25 | 895 | 840 | 794 | 32.5 | 24-M27 | 6 | 12 | 24 |
DN800 | 817 | 842 | 320 | 500 | ±25 | 1015 | 950 | 901 | 35 | 24-M30 | 6 | 12 | 24 |
DN900 | 911 | 945 | 320 | 500 | ±25 | 1115 | 1050 | 1001 | 37.5 | 28-M30 | 7 | 14 | 28 |
DN1000 | 1012 | 1048 | 330 | 545 | ±25 | 1230 | 1160 | 1112 | 40 | 28-M33 | 7 | 14 | 28 |
DN1200 | 1216 | 1255 | 350 | 580 | ±25 | 1455 | 1380 | 1328 | 45 | 32-M36 | 8 | 16 | 32 |
DN1400 | 1420 | 1462 | 380 | 630 | ±25 | 1675 | 1590 | 1530 | 46 | 36-M39 | 9 | 18 | 36 |
DN1500 | 1520 | 1565 | 400 | 665 | ±25 | 1785 | 1700 | 1640 | 47.5 | 36-M39 | 9 | 18 | 36 |
DN1600 | 1620 | 1668 | 400 | 700 | ±25 | 1915 | 1820 | 1750 | 49 | 40-M45 | 10 | 20 | 40 |
DN1800 | 1820 | 1875 | 420 | 730 | ±25 | 2115 | 2020 | 1950 | 52 | 44-M52 | 10 | 20 | 40 |
Jaki product specification in this catalogue for reference only,the product construction subject to Jakis design,Jaki reserve the right to change the design,construction, specification without prior notice and without incuring any obligation. Any definite information kindly contact with Jaki directly.